Fabrication Studio Renovation Details (August 2019)

 

Wednesday, August 14, 2019

WHAT’S HAPPENING?

Creative City Campus Renovations: Fabrication Studios

Temporary Closure and Renovations to the Fabrication Studios

  • Over the Summer and Fall of 2019, the Fabrication Studios (Wood, Metal, Plastics, Rapid Prototyping and Tool Loans) on Level 1 of 100 McCaul St. will be closed and renovated (see diagrams). 
  • Renovations will be completed by December 31, 2019. 

Objectives:

  • ​Improve OCAD U’s studio-based learning environments by expanding some studios and improving infrastructure within existing spaces​
  • Provide new equipment and technology​
  • Improve circulation, storage, work flow and transparency
  • Provide more opportunities for flexible student work space and social gathering​
  • Improve energy efficiency of building systems (heating, air conditioning and ventilation; lighting, controls, network, etc.)

 

How will the studios change? 

  • Significantly improved lighting and studio infrastructure
  • Reorganized layout that creates a more direct and connected pathway through the studios and new, flexible student working and gathering spaces
  • Reorganized layout that adds additional spaces for critique and faculty meetings
  • Improved visibility into the studios
  • Consolidated material sales and services space
  • Relocated and updated washroom
  • Improved energy efficiency of building systems (heating, air conditioning and ventilation; lighting, controls, network, etc.)

Impacts of the Fabrication Studio Closure

  • OCAD U recognizes the strong impact this project will have on our students, faculty, course offerings and equipment and process availability. 
  • Careful studies were conducted over many months in consultation with key stakeholders across the university to determine the most cost and time efficient approach to the project. 
  • The project includes adjusting course offerings as much as possible, in collaboration with Faculty offices and the Registrar. 
  • Adjustments were made to provide as much curriculum as possible in alterative spaces on campus, and to set up as much equipment as possible in temporary locations for use.
  • A process is in place to address students' needs for processes normally available at the university. Students can submit an inquiry online. Needs will be reviewed on a case-by-case basis in cooperation with Studio Management and relevant technicians.  
  • The scope and value contracts for impacted staff and faculty are maintained (i.e. our technician and faculty compliment is not reduced, but may be redeployed to other studios to support temporary equipment set ups).

TEMPORARY SET-UPS AND STUDIO ELEMENT RELOCATIONS

METAL STUDIO

Metal Temporary Location: Foundry Metals Area (see diagram)

  • MCA 152 will host Metal classes and related activities
  • Additional grinding stations in MCA 152E
  • Larger, less frequently used equipment located in the hallway recess, MCA 151 
  • MCA 154A, the future Digital Centre, will be used for short term tool and hardware storage.

Temporary Metal Equipment Set Up:

  • 4 Portable Oxy/Acetalene Units (6 workstations)
  • Cold cut saw
  • Additional drill press
  • Anvil
  • Lathe
  • Hossefeld bender
  • Mig welder
  • PLUS existing equipment in Foundry

WOOD STUDIO

Wood Temporary Location: ED / ID Shop (see diagram)

  • Additional equipment has been integrated into MCA 517 
  • Four additional larger, heavier work benches relocated to MCA 515 to facilitate larger projects
  • Some storage previously kept in MCA 515 has been relocated to MCA 528, to create space additional work space in the shop. 

Temporary Wood Equipment Set Up:

  • Larger planer
  • Large jointer
  • Additional table saw
  • 4 additional work benches 
  • PLUS existing wood working equipment

PLASTICS STUDIO

Plastics Temporary Location: MCA 316 (see diagram)

  • Table saw
  • Band saw
  • Drill Press
  • Mill
  • Mini lathe
  • Router
  • Mitre Saw
  • Formec
  • Work tables 

RAPID PROTOTYPING CENTRE

Rapid Prototyping Centre Temporary Location: MCA 314 (see diagram)

  • All current services, with the exception of the large CNC milling machine have been relocated. A small CNC milling machine has been added. 
  • Large CNC milling will be available through RP, facilitated by an external provider. Details available via the Rapid Prototyping web page.

Temporary RPC Equipment Set Up:

  • All 3D printers
  • All laser cutters
  • Small CNC milling machine

TOOL LOANS

Tool Loans is temporarily located in MCA 265 (formerly the Anniversary Gallery in 100 McCaul St.); entrance via hallway, across from Distribution Services 

STUDIO MANAGEMENT

Studio Management Offices are temporarily relocated to MCF 220 (51 McCaul St.)

 

Questions? Contact Us!
We’re here to collaborate with you as we work through the challenges and opportunities in this project! Don’t hesitate to get in touch with the team about any question!​ Reach us at creativecitycampus@ocadu.ca​. 

Andrea Hunniford, Manager, Campus Planning and Projects​
Joanne Frisch, Director, Campus Planning and Projects​
Nick Hooper, Director, Facilities and Studios​
Sarah Mulholland, Manager, Student Communications and Campus Community

Metal Studio accommodations: Level 1, George Reid Wing
Metal Studio accommodations: Level 1, George Reid Wing

Wood Studio accommodations: ED / ID Studio on Level 5
Wood Studio accommodations: ED / ID Studio on Level 5

Plastics Studio accommodations: MCA 316
Plastics Studio accommodations: MCA 316

Rapid Prototyping Accommodations: MCA 314
Rapid Prototyping Accommodations: MCA 314

Recipient of 2019 Nuit Blanche Independent Project Career Launcher Announced
Nuit Blanche Toronto and the Centre for Emerging Artists & Designers are excited to announce Crutch CAC as the recipient of the 2019 Independent Project Career Launcher.
By Anson Liaw
OCAD U Faculty Member Anson Liaw's Illustration was selected runner up in Creative Quarterly 57 - Professional Illustration Category. 
15% Discount on drinks for OCADU students, faculty and staff at Thor Espresso
Winning designs in 'I Voted' sticker competition
In the lead up to the upcoming 2019 federal election, OCAD University and Instagram have teamed up to encourage Canadians to participate in the election. This past spring, OCAD and Instagram launched the “I Voted” sticker competition, which provided design students at OCAD U and NSCAD with an opportunity to design an Instagram Story sticker that will allow Canadians to share their voting experience with the rest of the Instagram community. The sticker will also link to timely Election Day information on when and where Canadians can vote.  
Partial Gallery x OCAD U Artist Showcase banner
Partial Gallery and OCAD University are excited to announce a new partnership and opportunity for OCAD U Faculty of Art students and alumni. A select number of OCAD U students and graduates are receiving complimentary 1-year Pro Accounts on Partial and inclusion as featured artists within the OCAD University Artist Showcase on Partial’s online platform.
Paranoia by Doug Panton
Illustrator and OCAD U instructor Doug Panton was chosen as a winner n the Fine Art Category
Pick up the October issue of Elle Canada Magazine!
The Textile Museum of Canada is looking for Creatives in Residence! Three emerging professionals – an artist, a curator, and an educator – are invited to explore new forms of engagement with Museum audiences by animating exhibition spaces and activating the permanent collection.
Floor plate diagram of new Fabrication Studio layout
Floor plate diagram of areas of work for Fabrication Studios
Concept sketch: new Fabrication Centre entrance
Concept sketch: new Fabrication Centre corridor
Wednesday, August 14, 2019

WHAT’S HAPPENING?

Creative City Campus Renovations: Fabrication Studios

Temporary Closure and Renovations to the Fabrication Studios

  • Over the Summer and Fall of 2019, the Fabrication Studios (Wood, Metal, Plastics, Rapid Prototyping and Tool Loans) on Level 1 of 100 McCaul St. will be closed and renovated (see diagrams). 
  • Renovations will be completed by December 31, 2019. 

Objectives:

  • ​Improve OCAD U’s studio-based learning environments by expanding some studios and improving infrastructure within existing spaces​
  • Provide new equipment and technology​
  • Improve circulation, storage, work flow and transparency
  • Provide more opportunities for flexible student work space and social gathering​
  • Improve energy efficiency of building systems (heating, air conditioning and ventilation; lighting, controls, network, etc.)

 

How will the studios change? 

  • Significantly improved lighting and studio infrastructure
  • Reorganized layout that creates a more direct and connected pathway through the studios and new, flexible student working and gathering spaces
  • Reorganized layout that adds additional spaces for critique and faculty meetings
  • Improved visibility into the studios
  • Consolidated material sales and services space
  • Relocated and updated washroom
  • Improved energy efficiency of building systems (heating, air conditioning and ventilation; lighting, controls, network, etc.)

Impacts of the Fabrication Studio Closure

  • OCAD U recognizes the strong impact this project will have on our students, faculty, course offerings and equipment and process availability. 
  • Careful studies were conducted over many months in consultation with key stakeholders across the university to determine the most cost and time efficient approach to the project. 
  • The project includes adjusting course offerings as much as possible, in collaboration with Faculty offices and the Registrar. 
  • Adjustments were made to provide as much curriculum as possible in alterative spaces on campus, and to set up as much equipment as possible in temporary locations for use.
  • A process is in place to address students' needs for processes normally available at the university. Students can submit an inquiry online. Needs will be reviewed on a case-by-case basis in cooperation with Studio Management and relevant technicians.  
  • The scope and value contracts for impacted staff and faculty are maintained (i.e. our technician and faculty compliment is not reduced, but may be redeployed to other studios to support temporary equipment set ups).

TEMPORARY SET-UPS AND STUDIO ELEMENT RELOCATIONS

METAL STUDIO

Metal Temporary Location: Foundry Metals Area (see diagram)

  • MCA 152 will host Metal classes and related activities
  • Additional grinding stations in MCA 152E
  • Larger, less frequently used equipment located in the hallway recess, MCA 151 
  • MCA 154A, the future Digital Centre, will be used for short term tool and hardware storage.

Temporary Metal Equipment Set Up:

  • 4 Portable Oxy/Acetalene Units (6 workstations)
  • Cold cut saw
  • Additional drill press
  • Anvil
  • Lathe
  • Hossefeld bender
  • Mig welder
  • PLUS existing equipment in Foundry

WOOD STUDIO

Wood Temporary Location: ED / ID Shop (see diagram)

  • Additional equipment has been integrated into MCA 517 
  • Four additional larger, heavier work benches relocated to MCA 515 to facilitate larger projects
  • Some storage previously kept in MCA 515 has been relocated to MCA 528, to create space additional work space in the shop. 

Temporary Wood Equipment Set Up:

  • Larger planer
  • Large jointer
  • Additional table saw
  • 4 additional work benches 
  • PLUS existing wood working equipment

PLASTICS STUDIO

Plastics Temporary Location: MCA 316 (see diagram)

  • Table saw
  • Band saw
  • Drill Press
  • Mill
  • Mini lathe
  • Router
  • Mitre Saw
  • Formec
  • Work tables 

RAPID PROTOTYPING CENTRE

Rapid Prototyping Centre Temporary Location: MCA 314 (see diagram)

  • All current services, with the exception of the large CNC milling machine have been relocated. A small CNC milling machine has been added. 
  • Large CNC milling will be available through RP, facilitated by an external provider. Details available via the Rapid Prototyping web page.

Temporary RPC Equipment Set Up:

  • All 3D printers
  • All laser cutters
  • Small CNC milling machine

TOOL LOANS

Tool Loans is temporarily located in MCA 265 (formerly the Anniversary Gallery in 100 McCaul St.); entrance via hallway, across from Distribution Services 

STUDIO MANAGEMENT

Studio Management Offices are temporarily relocated to MCF 220 (51 McCaul St.)

 

Questions? Contact Us!
We’re here to collaborate with you as we work through the challenges and opportunities in this project! Don’t hesitate to get in touch with the team about any question!​ Reach us at creativecitycampus@ocadu.ca​. 

Andrea Hunniford, Manager, Campus Planning and Projects​
Joanne Frisch, Director, Campus Planning and Projects​
Nick Hooper, Director, Facilities and Studios​
Sarah Mulholland, Manager, Student Communications and Campus Community

Poster: 
Metal Studio accommodations: Level 1, George Reid Wing
Wood Studio accommodations: ED / ID Studio on Level 5
Plastics Studio accommodations: MCA 316
Rapid Prototyping Accommodations: MCA 314
Tool Loans (MCA 265) and Studio Management accommodations (MCF 51 McCaul)
Assembly room in MCA 161 - open for Fall 2019